If you own a 5th gen 4runner, sooner or later you will have to replace the rear brake pads. This is a pretty easy job that anyone can do with some basic tools. In this article, I will show you how to replace the rear brake pads on your 5th gen 4Runner.
If you’re like most 5th gen 4Runner owners, you’ve probably noticed that your rear brake pads are starting to wear down. While it’s not a difficult job to replace them, it is important to do it correctly so you don’t damage your brakes. Here are some tips on how to replace your rear brake pads:
1. Jack up the back of your 4Runner and remove the wheels.
2. Take off the old brake pads by removing the retaining clips and pushing the pistons back into the caliper with a flathead screwdriver.
3. Install the new brake pads by reversing the process – make sure the pad is properly seated in the caliper before putting the retaining clip back on.
4. Pump the brakes a few times to seat the new pads before putting the wheels back on and lowering your 4Runner off of the jack stands.
Credit: www.youtube.com
How Do You Change the Rear Brake Pads on a Toyota 4Runner?
If you’re like most Toyota 4Runner owners, you probably don’t think much about your rear brakes. But they are an important part of your vehicle’s braking system and should be inspected and serviced regularly. If you’re not sure how to change your rear brake pads, here’s a quick guide.
First, open the hood and locate the brake fluid reservoir. It will be on the driver’s side of the engine compartment, near the firewall. Remove the cap and set it aside.
Next, locate the caliper for the rear brakes. It will be mounted on the axle near the wheel. Use a wrench or socket to remove the bolts that hold it in place.
Once the caliper is loose, you can pull it off of the rotor. Be careful not to let it hang by its hydraulic hose – use a wire or bungee cord to secure it out of the way.
Now you can see the brake pads inside the caliper housing.
There are two – a wear indicator pad and a friction pad.
How Long Do Brakes Last 5Th Gen 4Runner?
If you own a 5th generation 4Runner, you’re probably wondering how long the brakes will last. The answer depends on a few factors, but in general, you can expect your brakes to last around 50,000 miles. However, if you drive in stop-and-go traffic or do a lot of downhill driving, your brakes may wear out sooner.
If you take good care of your brakes and have them serviced regularly, they should last even longer.
How Much Does Toyota Charge for Rear Brakes?
According to Toyota’s website, the company charges $75 for rear brakes. This price does not include labor or other associated costs.
When Should I Replace My 4Runner Rotors?
If you’re asking yourself when to replace your 4Runner rotors, the answer is most likely sooner than you think. Even if your 4Runner isn’t experiencing any brake problems, it’s a good idea to inspect the rotors at least once a year and replace them if they show signs of wear.
The most common sign that 4Runner rotors need to be replaced is uneven wear on the surface.
This can happen for a number of reasons, but usually indicates that the brakes aren’t being properly aligned or that the pads are wearing unevenly. If you see this, it’s time to replace the rotors.
Another less common but more serious sign that 4Runner rotors need to be replaced is cracks or scars on the surface.
This can be caused by excessive heat build-up from hard braking or other factors, and means that the rotor has been damaged and is no longer safe to use. If you see any cracks or scars on your 4Runner’s rotors,replace them immediately.
How To Replace Rear Brake Pads on a Toyota 4Runner
5Th Gen 4Runner Oem Brake Pads
If you’re in the market for new brake pads for your 5th gen 4Runner, there are a few things you should know. OEM brake pads are made by Toyota and are designed specifically for your vehicle. Aftermarket brake pads may be cheaper, but they’re not always the best quality or a perfect fit.
When it comes to safety, it’s worth it to spend a little extra on OEM brake pads.
There are a few different types of OEM brake pads available for the 5th gen 4Runner. The standard pad is made of ceramic and is designed for everyday driving.
If you do a lot of heavy braking or drive in hilly or mountainous terrain, you may want to consider upgrading to semi-metallic or full-metallic pads. These offer better performance and durability but can be more expensive.
When it comes time to replace your brake pads, make sure to have them replaced by a qualified technician using genuine Toyota parts.
This will ensure that your brakes are performing at their best and will help prolong the life of your brakes overall.
Conclusion
If your 5th gen 4runner rear brake pads are in need of replacement, don’t worry – it’s a pretty easy job that you can do yourself! This blog post will walk you through the entire process, step by step. You’ll need a few tools and supplies, but nothing too special – just your basic socket set and some brake grease.
Once you’ve got everything together, it should only take you about an hour to get the job done.